The DPL X101 series intelligent industrial edge computing gateway is the perfect solution for the industrial field, with excellent edge computing performance and 5G communication module, providing you with an industrial IoT solution of 5G+edge computing. Based on the Linux system, it uses the DPL Edge edge computing gateway software, customized for your needs, to meet the requirements of various industrial digital scenarios. It supports building smart factories and implementing applications for production line optimization, quality prediction, and equipment health management.
Application Areas
Industry 4.0: Data collection, computation, and forwarding in intelligent/data-driven factories
Smart Energy: Flow monitoring, data collection, and forwarding for energy management including photovoltaic, wind power, hydroelectric power, thermal power, etc.
Smart City: Energy monitoring for buildings, constructions, and factories.
IoT: Data collection, data forwarding, remote monitoring and control, and intranet penetration for field PLC, control systems, various controllers, instrument sensors in industries such as rail transportation, petroleum, chemicals, water supply, and heating.
Provides powerful edge computing performance to meet the needs of intelligent analysis of industrial traffic data and industrial AI machine vision
Equipped with a 5G communication module (optional), providing an industrial IoT solution of 5G+edge computing
Rich expansion interfaces and protocols for flexible customization according to field application requirements
Based on the Linux system, using the DPL Edge edge computing gateway software, customizable for various industrial digital scenarios
•Supports high-speed and low-latency connection experience, can choose to install 5G, 4G communication modules, and also supports dual-band WiFi, supports 5G frequency bands and LTE-A standards worldwide;
•equipped with routing, VPN, and firewall, dual WAN/LAN ports, can quickly and flexibly network;
•built-in hardware watchdog and various link detection mechanisms, achieve fast network switching.
•Having a high-performance main control chip, adopts a 4-core ARM Cotex-A53 architecture, with a frequency of 1.6GHz, and integrates a 2.3TOPS NPU, with 16GB of storage space;
•equipped with DPL Edge edge computing system, it can collect and analyze multi-dimensional sensor data such as traffic, pressure, temperature in real-time, and perform data processing, intelligent analysis, real-time response, and lightweight AI applications at the edge.
•Equipped with 2 x DI, 2 x DO, 2 x RS-232/RS-485 (software selectable), 2 x Gigabit Ethernet ports, 1 x USB 3.0, expandable microSD card up to 256GB;
• supports TCP/IP, UDP, NTP, DHCP, SSH, Telnet, Web, FTP, Docker, Python, and other protocols and components, and supports the installation of other third-party protocol libraries, components, and applications, minimizing the difficulty of user secondary development, and meeting various industrial IoT customization requirements.
•Can be connected to the self-developed DPL IoT Cloud IoT platform, convenient for remote management and maintenance of devices, realizing cloud-based data collection and visualization monitoring of device data. Supports efficient storage, computing, and analysis of heterogeneous data, and builds digital twin factories;
•Empowered by artificial intelligence, it achieves intelligent early warning, decision assistance, efficiency optimization, and improves management efficiency;
•Supports standard MQTT and TCP protocols, and can quickly connect to public cloud platforms such as AWS , Google Cloud , Alibaba Cloud etc.
•Adopts high industrial design standards, with a full metal casing and industrial-grade fanless design to reduce failure points;
•Supports a wide working temperature range (-40~70 degrees), suitable for 9~60V power input, and has a strong EMI design, enabling stable operation in harsh environments.
|
Hardware System |
|
|
|
CPU |
Quad core Cortex-A53, 1.6 GHz |
|
|
NPU |
2.3 TOPS |
|
|
RAM |
2 GB DDR4 |
|
|
Flash |
16 GB eMMC |
|
|
Cellular Interface |
|
|
|
Version |
4G |
5G |
|
Number of antennas |
2 |
4 |
|
Connector |
SMA-K |
|
|
SIM |
2 x Mini SIM (2FF) |
|
|
GNSS Interface (Optional) |
|
|
|
Version |
4G |
5G |
|
Number of antennas |
1 |
Optional, requires a 4-in-1 Combo Antenna |
|
Connector |
SMA-K |
|
|
Technology |
GPS |
|
|
Ethernet Interface |
|
|
|
Ports |
2 x RJ45, 10/100/1000Mbps, compliance with 1000BAST-T, LAN or WAN |
|
|
Magnet isolation protection |
1 KV |
|
|
Serial Interface |
|
|
|
Type |
2 x RS232/RS485 (software configurable) |
|
|
Connector |
6-pin 3.5 mm terminal block with lock |
|
|
ESD protection |
8 KV Air, 4 KV Contact |
|
|
Baud rate |
300 bps to 115200 bps |
|
|
Signal |
RS232: TXD, RXD, GND RS485: Data+ (A), Data- (B), GND |
|
|
DI/DO Interface |
|
|
|
Ports |
2 x DI + 2 x DO, wet contact |
|
|
Connector |
8-pin 3.5 mm terminal block with lock (DI/DO) |
|
|
Isolation |
Bi-directional optocoupler (DI) |
|
|
Single directional optocoupler (DO) |
|
|
|
Absolute maximum VDC |
+ 30V DC |
|
|
Absolute maximum ADC |
100 mA |
|
|
Signal definition |
DI1+, DI1-, DI2+, DI2-, DO1+, DO1-, DO2+, DO2- |
|
|
Wi-Fi Interface (Optional) |
|
|
|
Number of antennas |
2 |
|
|
Connector |
RP- SMA-K |
|
|
Standards |
802.11 a/b/g/n/ac, 2 x 2 MIMO, |
|
|
Frequency bands |
2.412 - 2.484 GHz (2.4 GHz ISM band) |
|
|
Security |
WEP 64-bit and 128-bit encryption with H/W TKIP processing |
|
|
WPA/WPA2 (Wi-Fi Protected Access) |
|
|
|
AES-CCMP hardware |
|
|
|
Data rate |
802.11n: up to 300 Mbps - 2 x 2 MIMO |
|
|
802.11ac: up to 866.7 Mbps (80 MHz channel) |
|
|
|
Bluetooth Interface (Optional) |
|
|
|
Number of antennas |
1 (Multiplexing Wi-Fi antenna) |
|
|
Connector |
RP-SMA-K |
|
|
Standards |
Bluetooth 2.1 and 3.0+Enhanced Data |
|
|
Others |
|
|
|
SD |
1 x microSD |
|
|
Reset button |
1x RST |
|
|
USB |
1 x USB 3.0 (host), Type A, 5V 900mA |
|
|
LED indicators |
1 x RUN, 1 x MDM, 1 x USR, 1 x Signal |
|
|
Watchdog |
External |
|
|
Software (Basic features of DPL Edge) |
|
|
|
Network protocols |
PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, DNS, NTP, SMTP, Telnet, VLAN, HTTPs, DNS, ARP, NTP, SMTP, Telnet, VLAN, SSH2, DDNS, etc. |
|
|
VPN tunnel |
IPsec, OpenVPN, GRE |
|
|
Firewall |
DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), |
|
|
Port Mapping, Access Control |
|
|
|
Remote management |
Web, CLI, SMS |
|
|
Serial port |
Transparent, TCP Client/Server, UDP, Modbus RTU Gateway |
|
|
Others |
Smart Reboot, Data Guard, Smart Roaming |
|
|
SDK |
|
|
|
Operating System |
DPL Edge (Based on Debian 11(bullseye)) |
|
|
Supported programming languages |
C, C++, Python, Java, Node.js etc. |
|
|
Debian Repository available |
|
|
|
Flash available for SDK |
14 GB |
|
|
RAM available for SDK |
1.5 GB |
|
|
Power Supply and Consumption |
|
|
|
Connector |
2-pin 3.5 mm terminal block with lock |
|
|
Input voltage |
9 ~ 60V DC |
|
|
Power consumption |
Idle: 5W |
|
|
Data link: 20W (peak) |
|
|
|
Physical Characteristics |
|
|
|
Ingress protection |
IP30 |
|
|
Housing & Weight |
Metal, 567 g |
|
|
Dimensions |
49 x 105 x 128 mm |
|
|
Installations |
Desktop, wall mounting and 35 mm DIN rail mounting |
|
|
Operating temperature |
-40 ~ +70 °C |
|
|
Storage temperature |
-40 ~ +85 °C |
|
|
Relative humidity |
5 ~ 95% RH |
|
|
Regulatory and Type Approvals(*Inprogress) |
|
|
|
Environmental |
RoHS2.0* |
|
|
Model |
PN |
Wi-Fi + BLE |
Cellular |
GPS |
Frequency Bands* |
Country/ |
Certification |
|
X101-A2CAZ-4L-A06GL |
B090704 |
√ |
√ |
√ |
4G、3G、2G |
Global |
CE |
|
X101-A2CAZ-5G-A25GL |
B090703 |
√ |
√ |
√ |
5G、4G、3G |
Global |
CE |
For specific frequency band data, please download and refer to the product specification sheet.
Please contact us through online customer service or by sending an email ：sales@doppel.com.cn.
400-800-5768
Room 101, Building A, Guangzheng Science and Technology Industrial Park, No.11 Nanyun Fifth Road, Huangpu District, Guangzhou
粤公网安备 44011202002543号 
telephone
400-800-5768
Customer service consultation
WeChat official account
|
