The DPLLS series dual channel ultrasonic flowmeter adopts a dual channel ultrasonic flow measurement product using American PhoTime technology, overcoming the shortcomings of single channel ultrasonic flowmeters that are not suitable for flow field changes, low accuracy, and unstable flow. The measurement principle is based on the delay method measurement. Due to the optimized design of using two sound channels, this ultrasonic flowmeter greatly overcomes the influence of turbulence randomness on measurement, greatly improving the adaptability and measurement accuracy for different working conditions. The use of ultrasonic flowmeter for measuring small flow is more guaranteed. It can be used as a quantitative control measurement standard.
Simultaneously supporting both mono and dual channels, and when one channel is abnormal or not connected, it can automatically switch to mono operation based on signal quality;
Using the latest 32-bit Cortex-M4 core CPU as the processor core, using 64 bit floating-point operations, the calculation does not lose accuracy;
Using high-speed ADC to collect ultrasonic signals, with ultrasonic waveform restoration and reconstruction technology; Using precision time measurement chips, the ultrasonic propagation time accuracy can reach 22 picoseconds;
Single board and full SMT process, all using SMT machine welding, greatly reducing problems such as solder joints, solder leaks, and short circuits in circuit boards;
Heat function: optional PT100 external clamp platinum resistor can achieve heat metering.
medium |
Most single-phase liquids, less than 5% particles or bubbles |
Pipe Material |
Stainless steel; PVC; carbon steel |
ambient temperature |
-40℃~+60℃ |
Fluid temperature |
-20℃~+120℃ |
Explosion proof level |
Explosion proof Exd II BT4 |
flow rate range |
Nominal accuracy flow rate range 0.1~12.5m/s |
measurement accuracy |
±0.5% |
sensitivity |
0.001m/s |
Measurement repeatability |
±0.2% |
protection grade |
IP65 |
power supply |
12V~24VDC,0.5A |
electrical interface |
Waterproof head 2*M20*1.5 |
lcd display |
128 * 64 dot matrix LCD |
Serial communication |
RS485, MODBUS RTU protocol |