DPLLD type split electromagnetic flowmeter complies with the standard JB/T9248-2015 "Electromagnetic Flowmeter". It is an induction instrument that measures the volume flow rate of conductive media. While monitoring and displaying on site, it can output standard current signals for recording, adjusting, and controlling, achieving automatic detection and control, and long-distance signal transmission. It can be widely used for flow measurement of conductive liquids in industries such as tap water, chemical industry, coal, environmental protection, light textile, metallurgy, papermaking, etc. We have obtained the explosion-proof qualification certificate issued by the National explosion-proof electrical product quality inspection center, with the explosion-proof symbol ExdllCT6, suitable for liquid measurement in various explosive environments.
The structure of the electromagnetic flowmeter sensor is simple, and there are no movable components in the measuring tube, and there are no throttling components that hinder fluid flow;
Can measure the flow rate of dirty, corrosive, and suspended liquid-solid two-phase flow;
During the measurement process, it is not affected by the temperature, viscosity, density, or conductivity (within a certain range) of the measured medium;
The output of an electromagnetic flowmeter is only proportional to the average flow velocity of the measured medium, and is independent of the flow state (laminar or turbulent) under symmetrical distribution;
Electromagnetic flowmeters have no mechanical inertia and are sensitive in response. They can measure instantaneous pulsating flow and can also measure flow in both positive and negative directions;
The caliber selection range of industrial electromagnetic flowmeters is wide.
Nominal Diameter |
Circular pipeline DN200-DN1000 |
Overall measurement accuracy |
Level 2.5 |
Lining material |
Neoprene rubber |
Electrode material |
316L; Hastelloy B; Hastelloy C; Titanium; Tantalum; Stainless steel coated with tungsten carbide |
Electrode form |
Standard type |
Connection method |
Flange connection |
working conditions |
Environmental temperature: -10~+60 ℃ (liquid in the pipeline will not freeze) |
Relative humidity: 5%~90% |
|
nominal pressure |
0.6MPa;1.0MPa;1.6MPa |
power supply |
AC220V; DC24V; 12V |
Dielectric conductivity |
≥20μs/cm |
ambient humidity |
5-100% RH (relative humidity) |
measuring range |
1500:1 flow rate setting<15m/s |
structural style |
Splitting type; immersion |
protection grade |
IP68 optional |
Explosion proof sign |
ExdIICT 4 |
Product standards |
JB/T9248-2015 Electromagnetic Flowmeter |