The LUGB series clamp connected vortex flowmeter overcomes the drawbacks of high cost, inconvenient operation, and low efficiency that require a uniform distribution of bolt holes on the connecting plate and the use of bolts and nuts to fix the connecting plate on the pipeline. Instead, it adopts a connecting plate with a right angle trapezoidal cross-section and a right angle trapezoidal bevel on the inner side. When in use, the clamp is used to fasten the connecting plate on the pipeline, which is low-cost, time-saving, and labor-saving. Clamp type flowmeters are mainly used in high complexity work environments such as oil fields.
The clamp connected vortex flowmeter adopts a connecting plate with a right angle trapezoidal cross-section, and the inclined edge of the right angle trapezoidal cross-section is opposite to the inner side. When in use, the connecting plate is fastened to the pipeline with a clamp, saving time and effort.
A packing box is installed on the connecting surface between the connecting plate and the pipeline, which has good sealing performance, high sealing strength, and convenient use.
Measurement medium |
Gas; Liquid; steam |
Caliber specifications |
DN25-300 |
Flow measurement range |
The normal measurement flow rate range of gas is 5-50m/s; Liquid 0.5~7m/s |
measurement accuracy |
Level 1.0; Level 1.5 |
Temperature of the tested medium |
Normal temperature -25 ℃~10 ℃; High temperature -25 ℃~150 ℃, -25 ℃~250 ℃ |
material quality |
Stainless steel; 304 stainless steel |
power supply |
DC24V or lithium battery 3.6V |
Explosion proof level |
Intrinsically safe type iaIIbT3-T6 |
protection grade |
IP65 |